A) The battery voltage may not be enough to turn it on. After charging the battery, please try again.
Q) What if the loading screen is not visible or the video freezes during operation?
A) Reset using the provided reset pin and try again.
Q) What if I can’t see the image video?
A) Blue LED on the camera and red LED on the system are displayed. In this case, request A/S.
Q) What if the image is output but no blood vessel is visible?
A) Check if the LED is working well, and put a calibration card on the output video. If the calibration card is shown in the output image, it is normal. If the calibration card is not shown, request A/S.
Q) What if the operation button is not recognized?
A) The battery voltage may be low. After charging the battery, please try again.
Q) What if the program does not end?
A) The program may not be terminated due to a temporary error. Turn on the power after resetting. If the same symptom occurs repeatedly, request A/S.
1404 World Meridian II, 123, Gasan Digital 2-ro, Geumcheon-gu, Seoul, Republic of Korea
Tel : +82-2-6925-5973 / Fax : 070-4325-0603 / E- mail : firstname.lastname@example.org
Copyrightⓒ. All Rights Reserved.